|
|
The Sys*Stim 216 is a portable, battery-operated interferential stimulator. It has three preset frequency sweeps plus a programmable single frequency selector as well as an automatic vector function. In addition, the Sys*Stim 216 has a bright digital display and will run for a full two hours on a single charge.
Weight: 12 ounces, (340g), with battery installed
Dimensions: 6" H x 3.9" W x 1.6" D (15.2cm H x 10cm W x 4cm D)
Warranty: 2 years
SysStim 216 Specifications
| Output: |
Single output, dual channel. |
| Stimulation: |
Portable Interferential Stimulation |
| Waveform: |
True Sinewave with built in vector rotation from 100% to
60% and then from 60% to 100% in 16 seconds |
| Voltage: |
40 V p-p @ 500 ohms load |
| Intensity: |
80 ma p-p @ 500 ohms load |
| Intensity control: |
0 to 99% of Maximum |
| Pulse Width: |
125 microseconds |
| Frequency: |
Channel 1: 4000 Hz
Channel 2: 4001 – 4250 Hz Mode dependent |
| Mode of Operation: |
Has 3 preset and 1 programmable mode
F1 Sweep Frequency from 1 – 10 Hz
F2 Sweep Frequency from 80 – 150 Hz
F3 Sweep Frequency from 1 – 250 Hz
F4 Fixed Beat Frequency output selectable from 10 – 250 Hz in steps of 10 Hz |
| Treatment Time: |
1 - 60 minutes |
| Display: |
LCD Window |
| Power source: |
Battery operated Four 1.2 V, 2100 MaH, Ni-Mh Rechargeable Battery |
| Battery Run Time: |
Minimum of 3 ½ hours treatment at full intensity on a fully charged battery |
| Low Battery Indicator? |
Yes |
| Battery Charging Time: |
a) First time Up to 12 hours
b) Subsequent 2 ½ to 3 hours |
| Battery Charger |
Battery charger with 8 batteries Included |
| Classification: |
TYPE BF, Battery Operated |
| Size: |
4.0 in. W x 6.25 in. L x 1.75 in. H |
| Weight: |
12 oz., including batteries |
Specifications and designs are subject to change without prior notice.
|
