VHS/DVD Wall Mount Bracket
LUX-LVDH

Wall mount brackets for VHS/DVD recorders, CD players,
digital cable receivers, and HD receivers. For your
convenience, brackets are stackable to create a tower
effect. The mounting ring tray extends 12in from the
wall and has a load capacity of 25 lbs. Wt. 5 lbs.
Black glossy powder coat finish.

Security System
LUX-LXSCS

Dual-Cable security system providing safety and security.
Protecting the mounting points on the chassis and the two
installation mounting points of wall or ceiling. Wt. 2 lbs.

Universal LCD Monitor Wall Mount
LUX-LLMSW

Revolutionary Universal LCD Monitor Mounts offer the first
multi-configurable design with the ability to configure the
LLMSW into several different mounting styles. Can
accommodate nearly every wall mount applications, 
with just one mount! The LLMSW works with nearly
every LCD monitor from 10in - 21in that uses a 75
or 100mm VESA standard.

Universal LCD monitor wall mount is a multi-configurable
mount as a single arm, double arm articulating or near
flush mount. Parts are provided. Holds most 10in - 21in
LCD monitors. Accommodates monitors with 75 or 100mm
VESA standards. Adjustable tilt -5° to + 10°. Mount rotates
240° at monitor, 160° at the wall, and 240° at the elbow
joint (double arm configuration). Feed through wall plate
with decorative cover. Load capacity 25 lbs.
Wt. 7 lbs. Silver powder coat paint finish.

Universal LCD Ceiling Mount
LUX-LLMSC

Universal LCD ceiling mount holds most 10in - 21in LCD
monitors. Accommodates monitors with 75 or 100mm
VESA standards. Adjustable tilt -5° to + 30°.
Mount rotates 360° at monitor. Mast telescopes
17in -27in from the ceiling. Includes clip based
management system. Load capacity 25 lbs.
Wt. 7 lbs. Silver powder coat paint finish.

Universal LCD Minitor Table/Desk Mount
LUX-LLMSD

Universal LCD monitor table/desk mount can be attached
as a clamp-on or bolt through mount. Holds most 10in - 21in
LCD monitors. Accommodates monitors with 75 or 100mm
VESA standards. Adjustable tilt -5° to + 30°. Mount rotates
260°. Force arm has adjustable 0° to 60° forward tilt.
Load capacity 25 lbs. Wt. 9 lbs. Silver powder coat paint finish.

Adapter Kit for Mounts
LUX-LXAPL

Adapter kit for the LXPBL allowing for adjustable
extension lengths from 26in -47in continuing the
channel enclosure for holding the cables while
providing that clean look. Wt. 9 lbs.

LCD Monitor Wall Mount
LUX-LLMSW2537

Large universal LCD monitor wall mount is a
multi-configurable mount as a single arm,
double arm articulating or near flush mount.
Parts are provided. Holds most 25in - 37in
LCD monitors. Accommodates monitors with
75, 100, 200 and 100 x 200 mm VESA standards.
Adjustable tilt - 5 degrees to + 30 degrees. Mount
rotates 240 degrees at monitor, 160 degress at
the wall, and 240 degrees at the elbow joint
(double arm configuration). Feed through wall
plate with decorative cover. Load capacity
50 lbs. Wt. 7 lbs. Silver powder coat paint finish.

Universal LCD Ceiling Mount
LUX-LLMSC2537

Large universal LCD ceiling mount holds most
25in - 37in LCD monitors. Accommodates monitors
with 75, 100, 200 and 100 x 200mm VESA
standards. Adjustable tilt -5 degrees to + 30 degrees.
Mount rotates 240 degrees at monitor. Mast telescopes
18in - 30in from the ceiling. Includes clip based cable
management system. Load capacity 50 lbs.
Wt. 7 lbs. Silver powder coat paint finish.

Universal Small Project Mount
LUX-LSPM

Universal small projector mount rotates 360°. Holds
most 10in - 21in LCD projectors. Adjustable tilt 0°
to 10°. Opens from 7in to 14in (left to right). Opens
from 3in to 5.75in (top to bottom). 8 point clamping
mechanisms adjust from 6.5in - 10in (front to back).
Mast telescopes 18in - 30in from ceiling. Integrated
flush mount plate included. Load capacity 75 lbs.
Wt. 15 lbs. Black power coat paint finish

Universal Projector Mount
LUX-LXPBL

Universal projector mount, rotates 360 degrees,
with an adjustable upward and downward 0-20
degree tilt and is an easy installation with a low-profile
and cable channel enclosure. Wt. 10 lbs.