JSP-A165- Commercial Trapeze Bar Plastisol Coated.  Our trapeze bar is coated in plastisol to brighten up your swing sets nd provide cool non-slip hand grips for children. This is a 20” long metal trapeze bar, 1 1/16" inches in diameter. Dipped in plastisol. National Testing Results: 3300 lbs. Grade: Commercial
	JSP-S110- Commercial Rubber Strap Seat w/washers.  This colorful and durable swing seat is 6" x 24" x 3/8" thick, with a vandal proof insert and stainless steel washers. Seats have a 1/2" hole that requires large end S-hook or H-shackle to be used for connecting hardware. This seat is made of EPDM rubber. Available in black, blue, green, red, and yellow. National Test Lab Results: 5470 lbs. Grade: Commercial.
	JPS-S115- Commercial Rubber Bumper Seat.  An extra piece of fluted rubber at the front and back of this seat gives it a cushioned bumper for added safety. It is made with a insert to resist vandalism and is made of EPDM rubber and galvanized triangular hardware. Available in black, blue, green, red, and yellow. National Test Results: 5000 lbs. Grade: Commercial.
	JSP-S150- Commercial Rubber Half Bucket Seat.  An exceptional tot seat, made of 5/16” thick EPDM rubber, with a vandal proof insert. The Safety chain is Test Lab Results: 3300 lbs. Grade: Commercial.
	JSP-S127- Commercial Roto Molded Flat Seat.   This seat is made of polypropylene. It is avaliable in bright colors that will not fade. These seats are made wider and sturdier to hold both small and large children. The dimensions are 20" long by 8" at the narrowest portion, to 9" wide at the widest section of the seat, and 2" high. This seat meets ASTM standards and can be used commercially or residentialy. This seat is extremely durable. Available in black, blue, green, red, and yellow. National Test Results: 5000 lbs. Grade: Commercial.
	JSP-S100- Commercial Rubber Enclosed Infant Seat.   A fully enclosed infant seat prevents small children from falling out.  Vandal proof, it is constructed of 3/8 EPDM Rubber, with a vandal proof insert and heavy duty rust proof hardware. It is a 36" circumference, 11" in diameter and 12" deep. The leg opening is 5" in diameter. Available in black, blue, green, red, tan, and yellow. National Test Lab Results: 5000 lbs. Grade: Commercial.
	JSP-S103- Commercial High Back Infant Seat.   A fully enclosed infant seat with a high back to offer extra support for smaller children. This seat also has smaller leg opening to meet the ASTM under 24 mo. entrapment ruling. Made of EPDM rubber with .020 steel insert and heavy duty rust proof hardware. Available in black, blue, red, green, yellow, and tan. Grade: Commercial.
	JSP-A145- Commercial Tire Swing.   Tire Swing is 30” in diameter with 16” opening and is 10" deep. It is made of MDPE. This tire has built in eye bolts that will accept our #H172. It weighs 19 lbs. which meets ASTM standards that states tires must weigh under 35lbs. Ships as oversize 70 lbs. Grade: Commercial
	JSP-S175-  Commercial Rotational Molded Full Bucket Seat.  Our rotational molded infant seat made of polypropylene. It is available in bright colors that will not fade. These seats meet ASTM standards, and can be used both commercially or residentialy. The extra wide hanger is especially designed so that the seat is gravitationally correct when a child is swinging in the seat. The hanger is made of stainless steel. This seat is extremely durable, and should hold up well in all applications. This seat is 12" across, 11 1/2" front to back, leg holes 6 1/2" in diameter and the seat is 8" deep. Available in black, blue, green, red and yellow. National Test Lab Results: 5000 lbs. Grade: Commercial.
	JSP-A165- Commercial Trapeze Bar Plastisol Coated.  Our trapeze bar is coated in plastisol to brighten up your swing sets nd provide cool non-slip hand grips for children. This is a 20” long metal trapeze bar, 1 1/16" inches in diameter. Dipped in plastisol. National Testing Results: 3300 lbs. Grade: Commercial
	JSP-SCOOP - Scoop Slide.  New rotational molded scoop slide that can be shipped U P S. The entrance and exit sections are 3 ft. long with a 17” seat and a 23” overall width. additional 2 ft. inserts , the A9700, can be added to make a 8-10-12-14-16 or 18 foot long slide. two section of 2x4’s (not supplied) are needed under the handrails for support.
	JSP-WAVE10 - Wave 10 Ft. Slide.  Try our new rotational molded double wave slide for light commercial and residential use. We have made the wave less pronounced so that the slide is not so fast for small children. It is more flexible to withstand the weather and freight companies. There is a stake hole in the bottom of the slide so that it can be staked to the ground to avoid being picked up. There are animal designs down both sides. The sides are also scalloped. The 10 ft slide fits a 5 ft platform. DISCLAIMER 1-10-07 THIS SLIDE NEEDS TO BE SHIPPED FREIGHT LINE AND THE COST FOR THIS IS $70.00 AND UP. BEFORE SIGNING FREIGHT BILL CHECK THE SLIDE OUT FOR DAMAGE. WE CAN NOT REPLACE A DAMAGED SLIDE UNLESS THE FREIGHT BILL IS SIGNED DAMAGED WHEN RECIEVED. Grade: Light Commercial / Residential