|
|
Features:
 |
Armrest
For an easy wheelchair transfer, snap the Armrest out by depressing the plastic lever and pulling up. |
 |
Height and Tilt
To adjust the height or tilt of the seat, just turn the marked handle under the seat - it's one-handed. |
 |
Footboard
Removable Footboard adjusts in 1" increments forward from a recessed position under the chair. Sandal and wedge accessories attach for foot positioning. |
 |
Casters
The sturdy push-and-steer Handle mounts on the back of the chair. Locking casters will keep the chair from rolling when you want it to stay in one place. |
 |
Adjustment points
Adjustment points are color-coded in bright blue. |
 |
Upholstery
Upholstery comes in elegant burgundy or tan with navy edging. |
Adjustments
|

Backrest Angle
The adjustable backrest moves through a 15° range. Use the oval knobs at the base of the backrest to adjust the angle. |
|

Tilt Action
The tilt handle pivots the entire seat up to 12° backward. Labeled tilt, it is also located under the seat. |
|

Spring Action
The spring action adds a dynamic element to the Chair, it responds to the changing positions of the child. For this option, two labeled levers under the seat enable or disable the spring mechanism. Choose "Tilt and Spring Frame" for this option. |
|

Seat Height
To adjust height, turn the marked handle under the seat - even one handed! With this feature, Chair height can be adjusted as your child grows. In a school setting use it for more than one child. |
|

Seat Depth
To change seat depth, loosen the knobs that are under the back of the seat. The backrest will slide in or out. Tighten the knobs to lock backrest in the new position. |
Accessories
|

Headrests
Headrests come in two shapes, flat and countoured, with vertical adjustments. They clip onto the chair back and adjust up and down. |

Trunk Support
The Trunk Support pads can be adjusted in width, angle, and height. The strap on the Trunk Support can be adjusted to control trunk movement and it releases when either end is lifted up. |
|

Leg Prompts / Abductor
The padded Abductor separates the knees and adjusts forward or back. It can also be removed. The Leg Prompts are an alternative to the Abductor and give more leg support. Straps pass around front of leg just below the knee, securing the leg to a pad behind the calf. They help support a user being assisted to a standing position. Leg Prompts and Abductor cannot be used simultaneously, they use the same bracket. |

Handhold and Tray
The Tray, a working surface with raised edges and rounded corners is very easy to clean. Remove it with a release catch under the front edge of the Tray. The Tray attaches to the armrests, which can tilt at different angles and are height adjustable, also when the Tray is attached. A movable, vertical Handhold can be used to stabilize one hand. More types of handholds are available, please see the Anchor Family pages. |
|

Sandals and Wedges
Sandals and Wedges lift or adjust the feet of the child. Configure them yourself with the unique "stack and latch" feature. Open the latches to reconfigure, then close each latch to secure the Wedge or Sandal. |

Additional Side Pads
Additional Side Pads can be added to reduce the seat width. They slip over the Armrest Pads. |
User Dimensions (Inches)
| Height |
42 - 55 |
 |
Key User Dimension: Height
The user's overall height is a general guide to help you select the appropriate Chair. Choose the model that allows for growth.
Important: Make sure that seat width, depth, and height are adequate for each individual user, and that the user's weight does not exceed the maximum working load. |
Item Dimensions (Inches)
| Armrest height above seat |
7 - 10½ |
| Backrest height |
Low 19 / High 24 |
| Frame width (with wheels) |
28 |
| Headrest cntr. ht. Above seat (high back) |
26 - 30 |
| Max. working load (lbs) |
225 |
| Seat depth |
15 - 20 |
| Seat height above Footboard |
14 - 17½ |
| Seat width (without pads) |
17 |
| Tray Dimensions |
13½ x 24 |
| Trunk support width |
10-14 |
Additional Images
|

Mobility |

3 Sizes |
|

Main Image |

R643 Live |
|

R621 Basic Chair |

R622 Live |
|

Low Back Series |

Medium Advanced Chair |
Full One Year Warranty: No nonsense, no small print. If any Rifton product breaks or fails in service during the first year we will replace it free of charge.
RETURNS: If you wish to return a Rifton product, please call us for return instructions within 30 days of receiving it. Please hold on to your carton and packaging materials until you are certain that your order fulfills your needs. You are responsible for repackaging and returning the item. There will be a 20% restocking charge. No unauthorized returns are accepted.
|