|
|
Our Curtain modular steel panel wall construction and a Shock Absorbing Frame To Cart Mounting System isolate the rack component system from jarring accidental contacts.
The slide in panel system provides 360° total access during equipment installation. Once installation is completed, Tuffy Rack Cart steel panels slide in to secure and protect the system.
Perforated 20 gauge steel panels are ventilated for heat dissapation, while solid key locked doors control access.
Features
- 19W x 22U Rack Frame
- Cart Frame Enclosure
- Swing Away Doors
- Perforated Back Panels
- Perforated Back Panel With Access Hole
- Perforated Side Panels
- 18 x 24 Top Shelf
- 18 x 24 Bottom Shelf
|
SKU Number |
Metal Rack Frame Dimensions |
Exterior Cart Dimensions |
Weight |
| HWC-TRCF-30313FD |
22U 19W x 13D |
24W x 18D x 52H |
90 LBS. |
Additional Images
|
Cart Enclosure & Metal Rack Frame (Shown
Above For Visual Aid Only) |
 |
Metal Rack Is Secured To Top Shelf By An Extra Large Bolt In Each Corner |
 |
Metal Rack Is Secured To Bottom Shelf By An Extra Large Bolt In Each Corner. Cushioning Is Provided By Two Large Rubber Washers. |
Tuffy Rack Cart Shell Features:
***Models do not include interior shelves.
Only Top & Bottom Shelves Are Available for
Rack Carts.
Rack mount Width 19. Rack Mount Depths
Available - 13 / 20 / 25 / 30.
Available in 5U, 13U, 22U & 30U.
11 Gauge Steel Rails. # 10-32 tapped mounting rails.
Four Caster Model Footprint 24 Wide x 18 Deep.
Six Caster Footprint 24 Wide x 36 Deep.
Modular panels and doors are 14 or 28 in height.
Side panels and doors are made of 20 gauge steel.
Swing out and swing down doors have piano type hinges.
Standard key lock for multiple door systems. Each
door includes two keys.
Vented side panels facilitate passive cooling.
Each cart includes one vented side panel
available with a cable access grommet hole.
Top & Bottom Shelves are constructed from an engineered
thermoplastic resin, injection molded plastic that will not
chip warp crack rust or peel.
5 Extra Wide Silent Roll, full swivel, ball bearing
casters, cushion casters, (two lockable on four caster
models; three lockable on six caster models).
1 Ό wide caster spans standard acceptable floor
construction tolerances (elevator gaps).
Cart Enclosure & Metal Rack Frame (Shown Above For Visual Aid Only)
Metal Rack Is Secured To Top Shelf By An Extra Large Bolt In Each Corner
Metal Rack Is Secured To Bottom Shelf By An Extra Large Bolt In Each Corner.
Cushioning Is Provided By Two Large Rubber Washers.
|
