|
|
.JPG&width=200&height=280)
View Larger Image
|
|
Acta-Back (22in. Height, Comfort-Tek Cover, Fits 23in. - 25in. Wheelchair with 2 Point Mounting Hardware)
Click here to the view details for the
Acta-Back
|
Moldable center section allows precise contours for any spinal curvature, increasing support and comfort that can accommodate lumbar, scoliosis, and kyphosis needs.
Medicare Code Acta-Back Standard, Tall, and Low - E2613 E2614 >22, Medicare Code Acta-Back Deep - E2615 E2616 >22
Features:
* Compass Hardware allows for back adjustments without transferring the patient or losing seat depth with angle adjustments. Fits 3/4, 7/8, and 1 tubing.
* Lightweight indestructible Kydex Shell allows for custom modifications without sacrificing the backs integrity.
* Soft and breathable Cordura knit cover.
* Headrests can be attached to the Standard, Tall, and Deep backs.
* Pediatric sizes start at 10.
* Designed for the active wheelchair user.
* Provides lower back support and helps prevent long term posture issues.
* Weighs 2.75 lbs and measures nine-and-a-half inches in height.
* Dual density high resiliency center section provides comfort and support.
* High resiliency wings extend past the shells edge to provide extra protection from the wheelchair canes.
* Headrests and laterals can be attached to all Acta-Back models.
Covers:
* STRETCH-AIR FABRIC: Designed for air transmission and heat reduction. This two-ply, breathable laminate combines a high-stretch lycra top layer, a layer of reticulating foam, and a waterproof, breathable vapor barrier.
* COMFORT-TEK: Engineered for pressure relief and comfort, Comfort-Teks multi-dimensional stretch alleviates pressure on bony prominences. It is fluid-proof and can easily be cleaned with detergent.
HCPCS CODES: It is solely the care provider's responsibility to determine if a given diagnosis properly corresponds to a given billing code, Rehabmart is simply providing this information as a starting point for possible billing code applicability. This information is based upon anecdotal accounts of acceptable billing codes for diagnoses in which the identified product has been used in the past. Rehabmart does not participate in the billing process and it is solely the caregiver's responsibility to determine if the billing code actually applies to the treatment provided.
|
SKU Number |
Height |
Weight |
Weight Limit |
Wheelchair Size |
|
Standard, 16in. Height Comfort-Tek, Compass Hardware |
| CFC-BK-MFC-16 |
16 |
4.9 lbs |
250 lbs |
15 - 17 |
| CFC-BK-MFC-18 |
16 |
5.9 lbs |
250 lbs |
17 - 19 |
| CFC-BK-MFC-20 |
16 |
6.25 lbs |
300 lbs |
19 - 21 |
| CFC-BK-MFC-22 |
16 |
6.85 lbs |
350 lbs |
21 - 23 |
| CFC-BK-MFX-24 |
16 |
8.25 lbs |
400 lbs |
23 - 25 |
| Standard, 16in. Height Stretch-Air, Compass Hardware |
| CFC-BK-MUC-16 |
16 |
4.9 lbs |
250 lbs |
15 - 17 |
| CFC-BK-MUC-18 |
16 |
5.9 lbs |
250 lbs |
17 - 19 |
| CFC-BK-MUC-20 |
16 |
6.2 lbs |
300 lbs |
19 - 21 |
| CFC-BK-MUC-22 |
16 |
6.8 lbs |
350 lbs |
21 - 23 |
| CFC-BK-MUX-24 |
16 |
8.18 lbs |
400 lbs |
23 - 25 |
| Thickness 2½ |
|
SKU Number |
Height |
Weight |
Lats |
Weight Limit |
Wheelchair Size |
| Deep, 16in. Height Comfort-Tek, Compass Hardware |
| CFC-BK-MDFC-16 |
16 |
5.9 lbs |
7½ |
250 lbs |
15 - 17 |
| CFC-BK-MDFC-18 |
16 |
6.8 lbs |
7½ |
250 lbs |
17 - 19 |
| CFC-BK-MDFC-20 |
16 |
7.35 lbs |
7½ |
300 lbs |
19 - 21 |
| CFC-BK-MDFC-22 |
16 |
7.5 lbs |
7½ |
350 lbs |
21 - 23 |
| CFC-BK-MDFX-24 |
16 |
8.55 lbs |
7½ |
400 lbs |
23 - 25 |
| Deep, 16in. Height Stretch-Air, Compass Hardware |
| CFC-BK-MDUC-16 |
16 |
6.0 lbs |
7½ |
250 lbs |
15 - 17 |
| CFC-BK-MDUC-18 |
16 |
6.0 lbs |
7½ |
250 lbs |
17 - 19 |
| CFC-BK-MDUC-20 |
16 |
7.35 lbs |
7½ |
300 lbs |
19 - 21 |
| CFC-BK-MDUC-22 |
16 |
7.5 lbs |
7½ |
350 lbs |
21 - 23 |
| CFC-BK-MDUX-24 |
16 |
8.55 lbs |
7½ |
400 lbs |
23 - 25 |
| Thickness 2½ |
|
SKU Number |
Height |
Weight |
Weight Limit |
Wheelchair Size |
| 22in. Height Comfort-Tek, Compass Hardware |
| CFC-BK-MTFC-16 |
22 |
6.1 lbs |
250 lbs |
15 - 17 |
| CFC-BK-MTFC-18 |
22 |
7.15 lbs |
250 lbs |
17 - 19 |
| CFC-BK-MTFC-20 |
22 |
7.65 lbs |
300 lbs |
19 - 21 |
| CFC-BK-MTFC-22 |
22 |
8.1 lbs |
350 lbs |
21 - 23 |
| CFC-BK-MTFX-24 |
22 |
10.5 lbs |
400 lbs |
23 - 25 |
| 22in. Height Stretch-Air, Compass Hardware |
| CFC-BK-MTUC-16 |
22 |
6.1 lbs |
250 lbs |
15 - 17 |
| CFC-BK-MTUC-18 |
22 |
7.15 lbs |
250 lbs |
17 - 19 |
| CFC-BK-MTUC-20 |
22 |
7.6 lbs |
300 lbs |
19 - 21 |
| CFC-BK-MTUC-22 |
22 |
8.05 lbs |
350 lbs |
21 - 23 |
| CFC-BK-MTUX-24 |
22 |
10.4 lbs |
400 lbs |
23 - 25 |
| Thickness 2½ |
|
SKU Number |
Height |
Weight |
Lats |
Weight Limit |
Wheelchair Size |
| 18in. Height Comfort-Tek, Compass Hardware |
| CFC-BK-M18FC-16 |
18 |
5.9 lbs |
7½ |
250 lbs |
15 - 17 |
| CFC-BK-M18FC-18 |
18 |
6.8 lbs |
7½ |
250 lbs |
17 - 19 |
| CFC-BK-M18FC-20 |
18 |
7.35 lbs |
7½ |
300 lbs |
19 - 21 |
| CFC-BK-M18FC-22 |
18 |
7.5 lbs |
7½ |
350 lbs |
21 - 23 |
| CFC-BK-M18FX-24 |
18 |
8.55 lbs |
7½ |
400 lbs |
23 - 25 |
| 18in. Height Stretch-Air, Compass Hardware |
| CFC-BK-M18UC-16 |
18 |
6.0 lbs |
7½ |
250 lbs |
15 - 17 |
| CFC-BK-M18UC-18 |
18 |
6.0 lbs |
7½ |
250 lbs |
17 - 19 |
| CFC-BK-M18UC-20 |
18 |
7.35 lbs |
7½ |
300 lbs |
19 - 21 |
| CFC-BK-M18UC-22 |
18 |
7.5 lbs |
7½ |
350 lbs |
21 - 23 |
| CFC-BK-M18UX-24 |
18 |
8.55 lbs |
7½ |
400 lbs |
23 - 25 |
| Thickness 2½ |
|
SKU Number |
Height |
Weight |
Weight Limit |
Wheelchair Size |
| Low, Comfort-Tek, Fixed Compass Hardware |
| BK-MLFC-14 |
9½ |
2.75 |
250 lbs |
13 - 15 |
| BK-MLFC-16 |
9½ |
2.85 |
250 lbs |
15 - 17 |
| BK-MLFC-18 |
9½ |
3.05 |
250 lbs |
17 - 19 |
| BK-MLFC-20 |
9½ |
3.15 |
300 lbs |
19 - 21 |
| Low, Stretch-Air, Fixed Compass Hardware |
| BK-MLUC-14 |
9½ |
2.75 |
250 lbs |
13 - 15 |
| BK-MLUC-16 |
9½ |
2.85 |
250 lbs |
15 - 17 |
| BK-MLUC-18 |
9½ |
3.05 |
250 lbs |
17 - 19 |
| BK-MLUC-20 |
9½ |
3.15 |
300 lbs |
19 - 21 |
| Thickness 2½" |
 |
Acta-Back Standard
E2613/E2614 |
 |
Acta-Back Deep
E2615/E2616 |
 |
Acta-Back Tall
E2613/E2614
|
 |
Acta-Back Low
E2613/E2614 |
Additional Images
 |
Moldable Center Section
- Center section may be removed and molded, increasing support and comfort to accommodate lumbar, scoliosis, and kyphosis needs.
- Moldable Aluminum stays are offset from the center, removing pressure points from the spine.
|
|
Hardware Mounting
|
|
|
Quick-Release
- Patented Compass Hardware is fully adjustable for height, depth, and angle of recline.
- Requires only 1.5 of space on each cane for mounting purposes.
- All adjustments can be made while the user is seated in the wheelchair, eliminating the need for multiple transfers during the fitting process.
- New quick-release feature allows back rest to be removed vertically within seconds.
- Hardware may be installed within minutes and fits 3/4, 7/8, and 1 tubing.
|
|
|
Fixed Compass Hardware
- Lightweight design.
- 2 depth adjustment, 2 height
- adjustment, and 360Ί angle adjustment.
- Adjustments may be made while user is seated in chair.
- Has Positioning Back Code!
- Quick release Compass Hardware available by request.
|
* 24 wide backs available with 2-pt mounting hardware only
|
|
|
|
Newsletter Signup