A small, portable stimulator with a clinical appearance. Choose the one-channel Sys*Stim 208 or the two-channel Sys*Stim 208A.
Since the first ME 200 muscle stimulator was introduced in 1976, The Sys*Stim® line of electrical neuromuscular stimulators has provided value. Each Sys*Stim stimulator is easy-to-use and has a variety of features that include a variety of popular waveforms, programmable output modes and portability.
The Sys*Stim 208 is a one channel, low-volt stimulator with Surge, Pulse and Tetanize modes. Sys*Stim 208A is a two-channel low-volt stimulator and features Surge, Pulse, Tetanize and Reciprocation modes. Adjustable pulse frequency, 1 to 80pps. Easy-to-operate knobs control stimulation intensity and frequency. Other features include a digital timer and a remote patient cut-off switch.
Weight: 1.4 pounds
Dimensions: 2.5" H x 6" D x 8" L
Specifications for Sym*Stim 208 and 208A
| Input: |
100 to 240 Volt AC 50/60 Hz. 0.75 Amp (max) |
| Weight: |
1.5 pounds |
| Dimensions: |
2.75 in. high x 6.1 in. deep x 8 in. long |
| Max Time: |
60 minutes |
| Channels: |
One |
| Waveform: |
Asymmetrical piplasic with zero net DC |
| Voltage: |
110 V Peak into a 1k ohm load |
| Intensity: |
56 µC Max per Pulse into a 100 ohm load |
| Phase Duration: |
200µS @ 50% Max Amplitude |
| Pulse Mode: |
1-80 Hz |
| Tetanize Mode: |
80 Hz |
| Surge Mode: |
80 Hz |
| Reciprocation Mode: |
80 Hz |
| Surge Cycle: |
0.5 On/Off to 3.75 On/Off |
| Reciprocation Cycle: |
0.5 CH1/CH2 to 3.75 CH1/CH2 (208A only) |
|
Newsletter Signup
