Name: Danmar Hard Shell Helmet with Face Guard
Brand: Danmar
SKU: DMP-9822XXS-
Price: 315.60 USD
Availability: InStock
Rating: 3.5 (6 reviews)

More Information

For the ease and convenience of the wearer, the entire clear face guard can pivot up or down allowing the user to optionally dine or receive care without removing the helmet.

Our strong polyethylene shell is riveted to the liner while the clear face guard is attached to that shell. The clear Lexan polycarbonate face guard has an eye level opening (1 inch by 6 inch) for unobstructed vision. The mouth opening (1 inch by 3 3/4 inches) allows for maximum ventilation through it. The Danmar Hard Shell Helmet with Face Guard has an average weight of only 25-ounces.

The bottom edge of the face guard is lined with a touch of soft foam for added comfort. The easily adjustable chin strap with snap closure is also included.

Face Guard Modifications
Basic face guard may be ordered without standard mouth and eye openings. As an example, ventilation holes could be used in place of the standard openings when the objective is to keep items out of the mouth or eye area. If ventilation holes are used in the eye area it should be noted that vision will be obstructed.

Stabilizing Side Tabs
Face guard is securely held in position by these attachments on each side of the helmet. Choose either permanent mount or pivot mount. The face guard remains positioned over the face and cannot be pivoted to the top of helmet if Permanent Mount is chosen. The Pivot Mount utilizes the quick release buckles to unsnap the face guard from the helmet enabling it to be pivoted up over the top of the shell.

Extra Long Face Guard Modification
A full one inch longer than the standard Face Guard, this modification also has larger eye and mouth openings too. Ther is an eye level opening of 7 in. x 2 in. for unobstructed vision and a mouth opening of 4.5 x 1.5 inches for maximum ventilation. This can be combined with 3461.

Rear Hard Shell Extension
In order to provide additional coverage at the back of the head, the polyethylene shell may be extended to cover the lower foam at the back of the helmet. Standard length of this attachment is three inches.

Foam Reinforcement
Reinforced vinyl material is bonded to our full helmet liner to prolong the life of the helmet. This strong material is especially good in situations when the helmet could be receiving particularly hard use.

Helmet Custom Strapping System
Ideal for those situations where there are attempts to remove the helmet at inappropriate times. Straps are attached to the bottom of the face guard and then cross comfortably under the chin, attaching to the back of the helmet with quick release buckles.

Reinforced Seams
Reinforced vinyl material is bonded into our foam liner seams, giving extra strength in these areas for situations where they receive exceptional stress.

Danmar Hard Shell Helmet with Face Guard Picture

Since proper fit is important for the comfort of the person wearing headgear, measurements should be determined by professional personnel.

Measure the head circumference (A) at eyebrow level. Occipital measurement (B) is taken from eyebrow level to the back of the head at the point that the helmet is to end. Over the top of the Head (C) to top of ears.

If for some reason the measurements do not fall within the above guidelines, or if there are other considerations to be taken into account, please contact Rehabmart Quotes, quotes@rehabmart.com, with your measurements to receive a Custom Helmet quote. When contacting, please include measurements above and measurement "D" which is taken from the eyebrows to the bottom of the chin. Measurement "E" is taken from the eyebrows to the top of the head, at eyebrow level following the contour of the head, to the point where it intersects with the ear-to-ear measurement. For ear coverings "F":": Height of ears, "G": Width of ears, "H": Extension (distance that the ears extend from the head). See below for chart.

Custom Sizing:

Danmar Hard Shell Helmet with Face Guard Picture

HEADGEAR SELECTION

Some suggested considerations to use in helping to determine what type of helmet would be suitable for your client.

degree of physical activity
potential striking surfaces (floor, walls, furniture, etc.)
nature of self abusiveness
severity & frequency of seizures or spasticity
length of time worn

IMPORTANT

While we believe that headgear can substantially reduce the risk of head injury we emphasize that there is no known device for preventing all injuries. Only you the customer are in a position to evaluate the particularized needs of the individual client in each environment. It is essential that professional and medical expertise be utilized in rendering decisions regarding headgear use.

Danmar Hard Shell Helmet with Face Guard Picture

Additional Images:

(DMP-9822) Hard Shell Helmet
with Face Guard,
shown with Casa Tan Liner

(DMP-9822) Hard Shell Helmet
with Face Guard,
shown with Black Liner

Helmet Modifications:

MODEL 3469 - QUICK RELEASE BUCKLE CHIN STRAP

Use in place of a regular chin strap when frequent attempts to remove the helmet occur. To release, just squeeze the buckle.

SPECIFY:

Under Chin Side Opening (DMP-3469-CHIN)

Top of Helmet Opening (DMP-3469-TOP)

MODEL 3467 - REINFORCED SEAMS

Reinforced vinyl material is bonded into our foam liner seams, giving extra strength in these areas for situations where they receive exceptional stress.

MODEL 3463 - STABILIZING SIDE TABS

Face Guard is securely held in position by these attachments on each side of the helmet.

Choose one of these two options:

1. Permanent Mount: the face guard remains positioned over the face and cannot be pivoted to the top of the helmet.

2. Pivot Mount: This mount utilizes the quick release buckles to unsnap the face guard from the helmet enabling it to pivot up over the top of the helmet.

MODEL 3472 - HELMET CUSTOM STRAPPING SYSTEM

Ideal for those situations where there are attempts to remove the helmet at inappropriate times. Straps are attached to each side of the 9821 Helmet (or to the bottom of the face guard on a 9822 Helmet) and then cross comfortably under the chin, attaching to the back of the helmet with quick release buckles. This also can be attached to our Model 9820 Soft Shell Helmet.

MODEL 3466 - FOAM REINFORCEMENT

Reinforced vinyl material is bonded to our full helmet liner to prolong the life of the helmet. Especially good in situations when receiving particularly hard use.

MODEL 3460 - SOFT FOAM EAR COVERINGS

Covers made from our soft ventilated foam extend down over the ear area of our soft shell helmet. This modifaction must be specified at the time of ordering the helmet. Sold per pair.

MODEL 3459 - HARD SHELL EAR COVERINGS

An inside layer of soft ventilated foam and an outer covering of tough polycarbonate are attached to a Hard Shell Helmet covering the ear area. These can be purchased with a new helmet or they can be attached to an older helmet. Instructions are included. Specify helmet size and color when placing order. Sold per pair.

MODEL 3461 - FACE GUARD MODIFICATION

Basic face guard may be ordered without standard mouth and nose openings. As an example, ventilation holes could be used in place of the standard openings when the objective is to keep items out of the mouth or eye area.

Options:

* Face Guard Modification No Openings, Solid Face Guard
* Face Guard Modification Vent holes around Solid Eye area, with Standard Mouth and Nose opening.
* Face Guard Modification Ventilation Holes in Eye area, Solid Mouth and Nose area
* Face Guard Modification Ventilation Holes in Eye, Nose and Mouth Area
* Face Guard Modification Ventilation Holes in Mouth and Nose area, Solid Eye area
* Face Guard Modification Ventilation holes in Mouth and Nose area, Vent Holes around Solid Eye area
* Face Guard Modification-Ventilation holes in the Mouth and Nose area, Standard Eye opening.

MODEL 3465 - REAR HARD SHELL EXTENSION

In order to provide additional coverage at the back of the head, the polyethylene shell may be extended to cover the lower foam at the back of the helmet.

Danmar Hard Shell Helmet with Face Guard Picture