As the latest innovation in mobility from the esteemed Shield Innovations, the EZRide+ Wheelchair Motor Assist Device transforms your manual wheelchair into an independently-driven unit with its powered assistance. Enhancing mobility, independence, and freedom for its growing community of very happy wheelchair users, this unique device delivers a desirable alternative to powered scooters and wheelchairs at a fraction of the cost. Compact, foldable, and lightweight, the EZRide+ ensures convenient portability, allowing it to be taken along in a vehicle for use wherever you roam, or stored away in a closet or under the bed when it's not in use.
Engaging at 3 speeds for versatile applications, the EZRide+ can travel up to 12 mph, with a distance range of 12 to 15 miles on a single charge. Accommodating riders weighing up to 300 pounds (including the chair), this motor assist uses a powerful 96W motor and a rechargeable lithium-ion battery, ensuring dependable power whenever you need it. It even has a horn and headlight to enhance safer driving. Its 360-degree turning radius offers maneuverable navigation for both forward and backward movement, while its built-in cruise control optimizes comfortable driving for longer excursions. Its solid-state tire won't go flat, ensuring reliable mobility for both indoor and outdoor use.
Several adapters and extensions are available as optional upgrades, ensuring the proper fit for a variety of different manual wheelchairs:
EZRide+ Handlebar Extension - While the EZRide+ comes with a 24.5-inch handlebar thats 36 inches from the wheel to the handlebar, you can also select an adjustable handlebar neck to increase the reach of the handlebar. Constructed with strong and lightweight aluminum, this extension measures 4.375 inches and offers 180 degrees of adjustability.
EZRide+ Tow Bar Extension - Constructed from .08-inch (2 mm) stainless steel square tubing and configurable for a 3-inch or 6-inch extension, the tow bar extension is recommended for larger users and chairs with larger footpads. It moves the hitch further away from the wheelchair to reduce obstruction risks.
EZRide+ Struts - Typically used for non-foldable, rigid wheelchairs, the EZRide+ struts can also be used for frames that are too narrow for the tow bar. Measuring 1 inch (25 mm) in diameter and 6 inches long, these struts can also be used to extend the power assist device further out from the front of the wheelchair. Using a pin-stop to prevent the tow bar clamps from sliding off, this set of two struts can be mounted on wheelchair tubing that measures up to 1.5 inches (38 mm) in diameter.
EZRide+ Butterfly Tow Bar Clips - Constructed with stainless steel, this set of two butterfly tow bar clips is designed to fit wheelchair tubing that measures up to 1.4 inches (36 mm). Compatible with the Invacare Crossfire, Kushal AirPro, Quickie GT, Tilite aeroZ, Tilite ZRA, and Strongback models 24, 24AB, 22s, and 22sAB, these clips are a great option for larger wheelchair tubing.
| What it is: |
What it does: |
| Tow Bar Extension |
Offers a bit more space between your wheelchair and the EZ Ride+. It can add 3-inches or 6-inches of additional space. This Tow Bar Extension is required for chairs with an 18-inch seat width or smaller (optional for chairs with a seat width larger than 18-inches), and is needed for users weighing 275-lbs. or more. |
| Handle Bar Extension |
Adds 4.375-inches of additional reach to the handle bars. The Handle Bar Extension is recommended for all users, as it allows a full 180° of angle manipulation and easier handling. The Handle Bar Extension is also needed for rigid chairs. |
| Butterfly Clips |
Enables compatibility with manual wheelchairs that have uniquely-sized front attachment tubing. Ideal for use with the Tilite aeroZ, Tilite ZRA, Invacare Crossfire, Quickie GT, Kushall AirPro, and Strongback models 24, 24AB, 22s, 22sAB. |
| Struts |
Provides additional extension space for the EZ Ride+. It's intended to be mounted on frames where the tow bar is too wide, even when fully collapsed. It's also suitable for those who wish to extend the EZ Ride+ further out than the Tow Bar Extension allows. The Struts are needed for rigid chairs. |
| Grab Handle |
Made with heavy-duty nylon mesh and secures via Velcro. It makes the EZRide easier to load, unload, and store, and its sturdy rubber handle is ideal for aging users or those with weaker hands. The Grab Handle is recommended for all users! |
Brake Adjustment
.jpg&quality=80&newwidth=540 "EZRide+ Wheelchair Power Assist (wheelchair not included)")
This product was featured in the following articles: .jpg&quality=&newwidth=540 "EZRide+ Wheelchair Power Assist Motor Attachment")
